Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

show application-monitor probe measurements

 

Syntax

Release Information

Command introduced in Junos OS Release 15.1X53-D30 on the QFX Series.

Description

Display bandwidth measurement information about a flow or flows that Cloud Analytics Engine is monitoring.

Note

For the equivalent command in releases other than Junos OS Release 15.1X53, see show analytics probe active-measurements.

Options

flow-id flow-id(Optional) Flow ID (numeric value > 0) of the flow for which to display bandwidth measurement information. If not specified, display information about all active flows.

Additional Information

Required Privilege Level

view

List of Sample Output

show application-monitor probe measurements—for all active flows (no flow-id specified)

show application-monitor probe measurements—for a specified flow

Output Fields

Table 1 describes the output fields for the show application-monitor probe measurements command. Output fields are listed in the approximate order in which they appear.

Table 1: show application-monitor probe measurements Output Fields

Field Name

Field Description

Flow ID

Flow ID.

Interface

Interface name.

Src-Addr

Source IP address of the flow.

Src Port

Source port of the flow.

Dest-Addr

Destination IP address of the flow.

Dest Port

Destination port of the flow.

Proto

Protocol of the flow.

BW

Bandwidth measurement configuration. Supported values: “IN”=ingress.

Counter

Bandwidth counter. Displayed only when a flow-id is specified.

Sample Output

show application-monitor probe measurements—for all active flows (no flow-id specified)

user@host> show application-monitor probe measurements

show application-monitor probe measurements—for a specified flow

user@host> show application-monitor probe measurements flow-id 1