show application-monitor probe flows

Syntax

Release Information

Command introduced in Junos OS Release 15.1X53-D30 on the QFX Series.

Description

Display information about all the flows that Cloud Analytics Engine is monitoring.

Note

For the equivalent command in releases other than Junos OS Release 15.1X53, see show analytics probe all-flows.

Options

This command has no options.

Additional Information

Required Privilege Level

view

Related Documentation

List of Sample Output

show application-monitor probe flows

Output Fields

Table 1 describes the output fields for the show application-monitor probe flows command. Output fields are listed in the approximate order in which they appear.

Table 1: show application-monitor probe flows Output Fields

Field Name	Field Description
*	Indicates overlay flow. Appears in the column to the left of the Flow ID.
+	Indicates pending requests for this flow.
Flow ID	Flow ID.
Interface	Interface name.
Src-Addr	Source IP address of the flow.
Src Port	Source port of the flow.
Dest-Addr	Destination IP address of the flow.
Dest Port	Destination port of the flow.
Proto	Protocol of the flow.
BW	Bandwidth measurement configuration. Supported values: “IN”=ingress.
Mirror	Mirroring configuration. Supported mirroring configurations: “IN”=ingress.

Sample Output

show application-monitor probe flows

user@host> show application-monitor probe flows