show analytics probe active-measurements
Syntax
Release Information
Command introduced in Junos OS Release 14.1X53-D15 on the QFX Series.
Description
Display ibandwidth measurement information about a flow or flows that Cloud Analytics Engine is monitoring.
For the equivalent command in Junos OS Release 15.1X53, see show application-monitor probe measurements.
Options
Additional Information
Required Privilege Level
view
Related Documentation
List of Sample Output
show analytics probe active-measurements (for all active flows)show analytics probe active-measurements flow-id (for a specified flow)
Output Fields
Table 1 describes the output fields for the show analytics probe active-measurements command. Output fields are listed in the approximate order in which they appear.
Table 1: show analytics probe active-measurements Output Fields
Field Name | Field Description |
|---|---|
Flow ID | Flow ID. |
Interface | Interface name. |
Src-Addr | Source IP address of the flow. |
Src Port | Source port of the flow. |
Dest-Addr | Destination IP address of the flow. |
Dest Port | Destination port of the flow. |
Proto | Protocol of the flow. |
BW | Bandwidth measurement configuration. Supported values: “IN”=ingress. |
Counter | Bandwidth counter. Displayed only when a flow-id is specified. |
Sample Output
show analytics probe active-measurements (for all active flows)
user@host> show analytics probe active-measurements* - Indicates Overlay Flow + - Indicates Pending requests for this Flow Flow Interface Src-Addr Src Dest-Addr Dest Proto BW ID Port Port * 1 et-0/0/48.0 10.0.1.100 5677 10.0.2.100 4789 UDP IN * 2 et-0/0/47.0 10.0.1.101 5677 10.0.2.100 4789 UDP IN
show analytics probe active-measurements flow-id (for a specified flow)
user@host> show analytics probe active-measurements
flow-id 1* - Indicates Overlay Flow + - Indicates Pending requests for this Flow Flow Interface Src-Addr Src Dest-Addr Dest Proto BW Counter ID Port Port 1 xe-0/0/0.0 10.0.4.101 59571 10.0.5.101 5001 UDP IN 3161