Related Documentation
- EX Series
- Network Analytics Overview
- analytics
- QFX Series
- Network Analytics Overview
- analytics
show analytics configuration
Syntax
Release Information
Command introduced in Junos OS Release 13.2 for the QFX Series.
Statement introduced in Junos OS Release 13.2X51-D25 for EX Series switches.
Description
Show the network analytics configuration details for the global and interface configurations.
Required Privilege Level
interface-control
Related Documentation
- EX Series
- Network Analytics Overview
- analytics
- QFX Series
- Network Analytics Overview
- analytics
List of Sample Output
show analytics configuration (Junos OS Release 13.2X51-D15 and Later)show analytics configuration (Junos OS Release 13.2X51-D10 and Earlier)
Output Fields
describes the output fields for the show analytics configuration command in Junos OS Release 13.2X51-D15 and later.
Table 1: show analytics configuration Command Output Fields (Junos OS Release 13.2X51-D15 and Later)
Field | Descriptions |
|---|---|
| Global Configurations | |
Traffic monitoring status | Settings are enabled or disabled. If traffic statistics monitoring is not enabled, this field is not shown. |
Traffic monitoring polling interval | Interval for traffic statistics polling in seconds. Note: Due to limitations and variations in hardware capability in different devices, there might be a difference in value between the actual interval and configured interval. |
Queue monitoring status | Settings are enabled or disabled. If queue statistics monitoring is not enabled, this field is not shown. |
Queue monitoring polling interval | Interval for queue statistics polling in milliseconds. Note: Due to limitations and variations in hardware capability in different devices, there might be a difference in value between the actual interval and configured interval. |
Queue depth high threshold | Upper limit of the depth threshold configuration in number of bytes. If the queue depth threshold is not configured, this field is not shown. |
Queue depth low threshold | Lower limit of the depth threshold configuration in number of bytes. If the queue depth threshold is not configured, this field is not shown. |
Queue latency high threshold | Upper limit of the latency threshold configuration in nanoeconds. If the queue latency threshold is not configured, this field is not shown. |
Queue latency low threshold | Lower limit of the latency threshold configuration in microseconds. If the queue latency threshold is not configured, this field is not shown. |
| Interface Configurations | |
Interface | Name of interface that is configured for network analytics. The interface configuration overrides the global network analytics configuration. |
Traffic Statistics | Settings are Enabled or Disabled for the interface. |
Queue Statistics | Settings are Enabled or Disabled for the interface. |
Queue depth threshold High | Upper limit of the depth threshold configuration in number of bytes. If the queue depth threshold is not configured, n/a is displayed. |
Queue depth threshold Low | Lower limit of the depth threshold configuration in number of bytes. If the queue depth threshold is not configured, n/a is displayed. |
Latency threshold High | Upper limit of the latency threshold configuration in nanoseconds. If the latency threshold is not configured, n/a is displayed. |
Latency threshold Low | Lower limit of the latency threshold configuration in nanoseconds. If the latency threshold is not configured, n/a is displayed. |
Table 2 describes the output fields for the show analytics configuration command in Junos OS Release 13.2X51-D10 and 13.2X50-D15.
Table 2: show analytics configuration Command Output Fields (Junos OS Release 13.2X51-D10 and earlier)
Field | Descriptions |
|---|---|
| Global Configurations | |
Traffic statistics | Settings are Auto, Enabled, or Disabled. If Auto is displayed, traffic statistics monitoring is not enabled. |
Poll interval (traffic statististics) | Interval for traffic statistics polling in seconds. If the output displays a setting of 0 seconds, the polling interval was not configured, and the default interval applies. Note: The default interval is 1 second in Junos OS Release 13.2X50-D15 and later, except for EX4300 switches, on which the default interval is 5 seconds, and 2 seconds in Junos OS Release 13.2X51-D10. Note: Due to limitations and variations in hardware capability in different devices, there might be a difference in value between the actual interval and configured interval. |
Queue statistics | Settings are Auto, Enabled, or Disabled. If Auto is displayed, queue statistics monitoring is not enabled. |
Poll interval (queue statististics) | Interval for queue statistics polling in milliseconds. Note: The default interval is 8 milliseconds in Junos OS Release 13.2X50-D15 and later, and 10 milliseconds in Junos OS Release 13.2X51-D10 or later. Note: Due to limitations and variations in hardware capability in different devices, there might be a difference in value between the actual interval and configured interval. |
Depth threshold high | Upper limit of the depth threshold configuration in number of bytes. If 0 is displayed, depth threshold is not enabled. |
Depth threshold low | Lower limit of the depth threshold configuration in number of bytes. If 0 is displayed, depth threshold is not enabled. |
Latency threshold high | Upper limit of the latency threshold configuration in microseconds. If 0 is displayed, latency threshold is not enabled. |
Latency threshold low | Lower limit of the latency threshold configuration in microseconds. If 0 is displayed, latency threshold is not enabled. |
| Interface Configurations | |
Interface | Name of interface that is configured for network analytics. The interface configuration overrides the global network analytics configuration. |
Traffic Statistics | Settings are Enabled or Disabled for the interface. |
Queue Statistics | Settings are Enabled or Disabled for the interface. |
Depth-threshold High | Upper limit of the depth threshold configuration in number of bytes. If 0 is displayed, depth threshold is not enabled. |
Depth-threshold Low | Lower limit of the depth threshold configuration in number of bytes. If 0 is displayed, depth threshold is not enabled. |
Latency-threshold High | Upper limit of the latency threshold configuration in microseconds. If 0 is displayed, latency threshold is not enabled. |
Latency-threshold Low | Lower limit of the latency threshold configuration in microseconds. If 0 is displayed, latency threshold is not enabled. |
Sample Output
show analytics configuration (Junos OS Release 13.2X51-D15 and Later)
user@host> show analytics configuration
Traffic monitoring status is enabled Traffic monitoring polling interval : 5 seconds Queue monitoring status is enabled Queue monitoring polling interval : 1000 milliseconds Queue depth high threshold : 99999 bytes Queue depth low threshold : 99 bytes Interface Traffic Queue Queue depth Latency Statistics Statistics threshold threshold High Low High Low (bytes) (nanoseconds) xe-0/0/16 enabled enabled n/a n/a 2300 20 xe-0/0/18 enabled enabled n/a n/a 2300 20 xe-0/0/19 enabled enabled n/a n/a 2300 20
show analytics configuration (Junos OS Release 13.2X51-D10 and Earlier)
user@host> show analytics configuration
Global configurations: Traffic statistics: Enabled, Poll interval: 2 seconds Queue statistics: Auto, Poll interval: 10 milliseconds Depth threshold high: 0 bytes, low: 0 bytes Latency threshold high: 0 microseconds, low: 0 microseconds Interface Traffic Queue Depth-threshold Latency-threshold Statistics Statistics High Low High Low (bytes) (microseconds) xe-0/0/0 Auto Auto 204800 10 0 0
