request virtual-chassis vc-port (Dedicated VCP)
Syntax
<member member-id> <disable>
Release Information
Command introduced in Junos OS Release 9.0.
Description
Disable or enable a Virtual Chassis port (VCP) on a dedicated VCP.
Configure a Gigabit Ethernet link on an EX8200 switch as a VCP in an EX8200 Virtual Chassis. You can use this command only to configure a link between two EX8200 member switches as a VCP link; all other links in an EX8200 Virtual Chassis are automatically VCP links.
Options
If you omit member member-id in an EX4200 Virtual Chassis, EX4500 Virtual Chassis, EX4550 Virtual Chassis, mixed Virtual Chassis, this command defaults to disabling or enabling the dedicated VCP on the switch where the command is issued. The dedicated VCPs are enabled in the factory default configuration.
This option must be specified when using this command to configure a VCP link between two EX8200 switches.
Additional Information
Required Privilege Level
system-control
Related Documentation
List of Sample Output
request virtual-chassis vc-port set interface vcp-0 disable (EX4200 Virtual Chassis)request virtual-chassis vc-port set fpc-slot 4 pic-slot 0 port 2 member 1 (EX8200 Virtual Chassis)
request virtual-chassis vc-port set interface vcp-0 member 3 disable (EX8200 Virtual Chassis)
Sample Output
request virtual-chassis vc-port set interface vcp-0 disable (EX4200 Virtual Chassis)
user@switch> request virtual-chassis vc-port
set interface vcp-0 disable
To check the results of this command, use the show virtual-chassis vc-port command.
request virtual-chassis vc-port set fpc-slot 4 pic-slot 0 port 2 member 1 (EX8200 Virtual Chassis)
user@external-routing-engine>
request virtual-chassis vc-port set fpc-slot
4 pic-slot 0 port 2 member 1
To check the results of this command, use the show virtual-chassis vc-port command.
request virtual-chassis vc-port set interface vcp-0 member 3 disable (EX8200 Virtual Chassis)
user@external-routing-engine> request virtual-chassis
vc-port set interface vcp-0 member 3 disable
To check the results of this command, use the show virtual-chassis vc-port command.