Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

request modem wireless sim-lock

 

Syntax

Release Information

Command introduced in Junos OS Release 9.5.

Description

Lock the Subscriber Identity Module (SIM) on the Mini-PIM. The SIM lock does not take effect until the next reboot of the services gateway. You can verify the locked mode using the show modem wireless firmware command.

Note

If there are two SIMs installed on the LTE Mini-PIM, then only the active SIM is locked. After the SIM is locked, it cannot connect to the network. The SIM must be unlocked before it is used to connect to the network.

Options

  • interface-name—The LTE Mini-PIM is denoted as cl-x/0/0, where x is the slot number in which the LTE Mini-PIM is installed.

  • pin pin—Four-digit personal identification number (PIN). Obtain the PIN from the service provider.

    Note

    If the PIN is entered incorrectly three consecutive times, the SIM card is blocked. Obtain a PIN unblocking key (PUK) from the service provider.

Required Privilege Level

maintenance

List of Sample Output

request modem wireless sim-lock

Sample Output

request modem wireless sim-lock

user@host> request modem wireless sim-lock enable cl-1/0/0 pin 4321