Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

request chassis sib

 

List of Syntax

Syntax

Syntax (TX Matrix Router)

Syntax (TX Matrix Plus Router)

Syntax

Syntax (TX Matrix Router)

Syntax (TX Matrix Plus Router)

Release Information

Command introduced before Junos OS Release 7.4.

f13 and f2s options for the TX Matrix Plus router introduced in Junos OS Release 9.6.

Description

(M320 routers and T Series routers only) Control the operation of the specified Switch Interface Board (SIB).

Options

all-chassis(TX Matrix routers only) Control the status of the specified SIB.
all-lcc(TX Matrix Plus router only) On TX Matrix Plus router, control the operation of the SIB on all routers connected to the TX Matrix Plus router.
f13 slot-numberControl the operation of F13 SIBs. Replace slot-number with a value 0, 1, 3, 4, 6, 7, 8, 9, 11, or 12.
f2s sib-slot/sib-f2s-slot-number(TX Matrix Plus routers only) (Optional) Control the operation of the SIB F2s. Replace sib-slot with a value from 0 through 4, followed by a sib-f2s-slot-number value 0, 2, 4 or 6.
lcc number(TX Matrix router and TX Matrix Plus router only) (Optional) Line-card chassis number.

Replace number with the following values depending on the LCC configuration:

  • 0 through 3, when T640 routers are connected to a TX Matrix router in a routing matrix.

  • 0 through 3, when T1600 routers are connected to a TX Matrix Plus router in a routing matrix.

  • 0 through 7, when T1600 routers are connected to a TX Matrix Plus router with 3D SIBs in a routing matrix.

  • 0, 2, 4, or 6, when T4000 routers are connected to a TX Matrix Plus router with 3D SIBs in a routing matrix.

scc(TX Matrix router only) TX Matrix router (switch-card chassis) on a routing matrix.
offlineTake the SIB offline.
Note

In PTX Series (PTX3000 and PTX5000) and T Series (T640 and T1600) Routers with active PFE interfaces, when the last SIB is taken offline, a message displays that if no SIB is brought online within 10 seconds, the system will take action to address the fabric null route condition. Taking all SIBs offline in these PTX Series or T Series Routers with active PFE interfaces results in null route condition, and the software takes action to rectify this condition if it persists for more than 10 seconds. If these routers do not have active PFE interfaces, taking all SIBs offline does not result in null route condition, and the message is not displayed when the last active SIB is taken offline. For details on null route condition, see Fabric Resiliency and Degradation.

onlineBring the SIB online.
slot slot-numberSIB slot number. For the T320 router, replace slot-number with a value from 0 through 2. For the T640 router, TX Matrix router, and T1600 router in a routing matrix, replace slot-number with a value from 0 through 4.
start-receiver number(TX Matrix routers only) Start the SIB optical receiver. Replace number with a value from 0 through 3.
stop-receiver number(TX Matrix routers only) Stop the SIB optical receiver. Replace number with a value from 0 through 3.

Required Privilege Level

maintenance

List of Sample Output

request chassis sib

request chassis sib

Output Fields

When you enter this command, you are provided feedback on the status of your request.

Sample Output

request chassis sib

user@host> request chassis sib slot 0 online

request chassis sib

user@host> request chassis sib f13 slot 0 offline