Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Example: Configuring Routing Interfaces on the VPLS PE Router

 

This example shows how to configure routing interfaces on the VPLS PE router.

Requirements

Before you begin, see Understanding Selective Stateless Packet-Based Services .

Overview

In this example, you configure the PE1 router loopback interface and the interface to the PE2 router ge-2/0/1.

Configuration

Step-by-Step Procedure

To configure the routing interface on the VPLS PE router:

  1. Configure the loopback interface.
  2. Configure the IP address on the MPLS core interface.
  3. Configure the MPLS family.
  4. If you are done configuring the device, commit the configuration.

Verification

To verify the configuration is working properly, enter the show interfaces command.