Example: Configuring Static Subscribers for Subscriber Access

 

This example shows a static subscriber configuration.

  1. Configure the access profile to be used for static subscribers.
  2. Configure the dynamic profile to be used for static subscribers.

    If you do not configure this profile, the default profile, junos-default-profile, is used.

  3. Configure the static interfaces on which to layer the static subscribers.
  4. Configure the parameters that apply globally to all static subscribers in the configuration context.
  5. If you want to override the global parameters for certain static subscribers, create a group of static interfaces for those subscribers and configure parameters to apply to that group. Repeat this step for as many groups as you need.
  6. Configure tracing options for static subscriber events.