Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring the Spanning Tree Protocol (J- Web Procedure)

    Starting in Junos OS Release 15.1X49-D70, the Spanning Tree Protocol (STP) is supported on SRX300, SRX320, SRX340, SRX345, SRX550M, and SRX1500 devices.

    Spanning Tree Protocol (STP) is not supported from Junos OS Release 15.1X49-D40 to Junos OS Release 15.1X49-D60.

    This example shows you how to configure the Spanning Tree Protocol on a Ethernet switched network.


    Before you begin:


    In this example, you enable the Spanning Tree Protocol on switched Ethernet ports.


    GUI Step-by-Step Procedure

    To access the Spanning Tree Quick Configuration:

    1. In the J-Web user interface, select Configure>Switching>Spanning Tree.

      The Spanning Tree Configuration page displays a list of existing spanning-trees. If you select a specific spanning tree, the specific spanning tree details are displayed in the General and Interfaces tabs.

    2. Click one of the following:
      • Add—Creates a spanning tree.
      • Edit—Edits an existing spanning-tree configuration.
      • Delete—Deletes an existing spanning tree.

      When you are adding a spanning tree, select a protocol name: STP, RSTP, or MSTP.

      Select the Ports tab to configure the ports associated with this spanning tree. Click one of the following:

      • Add—Creates a new spanning-tree interface configuration.
      • Edit—Modifies an existing spanning-tree interface configuration.
      • Delete—Deletes an existing spanning-tree interface configuration.

      When you are adding or editing a spanning-tree port, enter information describing the port.

    3. Click one:
      • Click OK to check your configuration and save it as a candidate configuration, then click Commit Options>Commit.
      • Click Cancel to cancel the configuration without saving changes.

    Modified: 2017-11-13