Example: Configuring Channelized T1 IQ and IQE Interfaces
Configure a channelized T1 interface as an unpartitioned, clear channel.
Configuring a T1 Interface
[edit interfaces]
ct1-2/0/0 {
no-partition interface-type t1; # t1-2/0/0
}
Configure a partitioned channel group.
Configuring a Channel Group
[edit interfaces]
ct1-0/0/1 {
partition 1 interface-type ds0 timeslots 1-10;
partition 2interface-type ds0 timeslots 11-20;
}
The following configuration is sufficient to get the channelized T1 IQ or IQE interface up and running:
Configuring Multiple Interface Types
[edit]
interfaces {
ct1-1/2/3 {
partition 1 timeslots 10 interface-type ds; # ds-1/2/3:1
partition 2 timeslots 1-9 interface-type ds; # ds-1/2/3:2
}
ds-1/2/3:1 {
unit 0 {
family inet {
address 10.25.1.2/24;
}
}
}
ds-1/2/3:2 {
unit 0 {
family inet {
address 10.25.2.2/24;
}
}
}
}
[edit]
interfaces {
ct1-1/2/6 {
no-partition interface-type t1; # t1-1/2/6
}
t1-1/2/6 {
t1-options {
timeslots 1-2;
}
unit 0 {
family inet {
address 10.255.126.2/24;
}
}
}
}