Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

ON THIS PAGE

Example: Configuring the Number of Aggregated Ethernet Interfaces on a Device

 

This example shows how to configure the number of aggregated Ethernet interfaces on a device.

Requirements

No special configuration beyond device initialization is required before configuring an interface.

Overview

In this example, you create two aggregate Ethernet interfaces, thereby enabling all the interfaces that you need for your configuration in one step.

Configuration

Step-by-Step Procedure

To configure the number of aggregated Ethernet interfaces on a device:

  1. Set the number of aggregated Ethernet interfaces.
  2. If you are done configuring the device, commit the configuration.

Verification

To verify the configuration is working properly, enter the show chassis aggregated-devices command.

Related Documentation