Example: Configuring Junos Capture Vision on M and T Series Routers
The following example includes all parts of a complete Junos Capture Vision configuration.
Configure the Junos Capture Vision PIC interface:
Configure the capture group:
Configur3 filter-based forwarding (FBF) to the Junos Capture Vision PIC interface, logical unit 1.
For more information about configuring passive monitoring interfaces, see Enabling Passive Flow Monitoring on M Series, MX Series or T Series Routers.
Configure the firewall filter:
Configure a forwarding routing instance. The next hop points specifically to the logical interface corresponding to unit 1, because only this particular logical unit is expected to relay monitored data to the Junos Capture Vision PIC.
Configure routing table groups:
Configure interfaces to the control source and content destination: