Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Example: Minimum DHCP Relay Agent Configuration

    This example shows the minimum configuration you need to use the extended DHCP relay agent on the router or switch:

    [edit forwarding-options]
    dhcp-relay {server-group {test 203.0.113.21;}active-server-group test;group all {interface fe-0/0/2.0;}}

    Note: The interface type in this topic is just an example. The fe- interface type is not supported by EX Series switches.

    This example creates a server group and an active server group named test with IP address 203.0.113.21. The DHCP relay agent configuration is applied to a group named all. Within this group, the DHCP relay agent is enabled on interface fe-0/0/2.0.

    Modified: 2017-04-26