Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Example: Configuring BGP for CLNS VPNs

 

This example shows how to create a BGP group for CLNS VPNs, define the BGP peer neighbor address for the group, and define the family.

Requirements

Before you begin, configure the network interfaces. See the Interfaces User Guide for Security Devices.

Overview

In this example, you create the BGP group called pedge-pedge, define the BGP peer neighbor address for the group as 10.255.245.215, and define the BGP family.

Configuration

CLI Quick Configuration

To quickly configure this example, copy the following commands, paste them into a text file, remove any line breaks, change any details necessary to match your network configuration, copy and paste the commands into the CLI at the [edit] hierarchy level, and then enter commit from configuration mode.

Step-by-Step Procedure

The following example requires you to navigate various levels in the configuration hierarchy. For information about navigating the CLI, see Using the CLI Editor in Configuration Mode.

To configure BGP for CLNS VPNs:

  1. Configure the BGP group and define the BGP peer neighbor address.
  2. Define the family.
  3. If you are done configuring the device, commit the configuration.

Verification

Verifying the Neighbor Status

Purpose

Display information about the BGP peer.

Action

From operational mode, run the show bgp neighbor 10.255.245.213 command. Look for iso-vpn-unicast in the output.

user@host> show bgp neighbor 10.255.245.213