Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Example: Configuring the Number of Redundant Ethernet Interfaces in a Chassis Cluster

    This example shows how to specify the number of redundant Ethernet interfaces for a chassis cluster. You must configure the redundant Ethernet interfaces count so that the redundant Ethernet interfaces that you configure are recognized.

    Requirements

    Before you begin, set the chassis cluster ID and chassis cluster node ID. See Example: Setting the Chassis Cluster Node ID and Cluster ID.

    Overview

    Before you configure redundant Ethernet interfaces for a chassis cluster, you must specify the number of redundant Ethernet interfaces for the chassis cluster.

    In this example, you set the number of redundant Ethernet interfaces for a chassis cluster to 2.

    Configuration

    Step-by-Step Procedure

    To set the number of redundant Ethernet interfaces for a chassis cluster:

    1. Specify the number of redundant Ethernet interfaces:
      {primary:node0}[edit]
      user@host# set chassis cluster reth-count 2
    2. If you are done configuring the device, commit the configuration.
      [edit]
      user@host# commit

    Verification

    Verifying the Number of Redundant Ethernet Interfaces

    Purpose

    Verify that the configuration is working properly.

    Action

    To verify the configuration, enter the show configuration chassis cluster command.

    Modified: 2017-12-04