Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Example: Configuring Active Monitoring on an M, MX or T Series Router’s Logical System

 

This example shows a sample configuration that allows you to configure active monitoring on a logical M-series, MX-series, T-series, or PTX Series system.

The following section shows the configuration on the primary router:

The configuration for the logical router uses the input parameters and the output interface for sampling from the primary router. Each logical router should have separate template definitions for the flow-server configuration. The following section shows the configuration on the logical router: