Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All
     

    Related Documentation

     

    Tri-Rate SFP for ACX5000 Series Routers

    Junos OS for ACX5000 Universal Access Routers supports 10 Mbps, 100 Mbps and 1 Gbps speeds for SFP-FE-ET model.

    To configure the speed on the interfaces with these tri-rate SFPs, include the speed CLI statement at the [edit interfaces interface-name] hierarchy level. Auto speed not supported in ACX5000 Series routers.

    To verify the speed set for a configured interface, use the show interfaces interface-name extensive | grep speed command.

    The following is a sample output for show interfaces interface-name extensive | grep speed command:

    Link-level type: Ethernet, MTU: 9192, LAN-PHY mode, Link-mode: Full-duplex, Speed: 100mbps, BPDU Error: None,
    Link mode: Full-duplex, Flow control: Symmetric/Asymmetric, Remote fault: OK, Link partner Speed: 100 Mbps
     

    Related Documentation

     

    Modified: 2016-11-08