Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring a Layer 2 Protocol Tunnel Interface in ACX Series

    To configure the interface where Layer 2 protocol tunneling is enabled, include the interface ge-fpc/pic/port statement at the [edit protocols layer2-control] hierarchy level.

    Keep the following guidelines in mind when configuring Layer 2 protocol tunneling:

    • Layer 2 protocol tunneling must be configured on the interfaces at each end of the tunnel.
    • You can enable Layer 2 protocol tunneling for untagged interfaces and single VLAN tagged interfaces only.
    • For single VLAN tagged interfaces, configure a logical interface with the native VLAN identifier. This configuration associates the untagged control packets with a logical interface.
    • You cannot enable Layer 2 protocol tunneling for double identifier tagged interfaces.

    Modified: 2015-12-10