Monitoring IDP Status
View detailed information about the IDP Status, Memory, Counters, Policy Rulebase Statistics, and Attack table statistics.
To view Intrusion Detection and Prevention (IDP) table information, do one of the following:
If you are using SRX5400, SRX5600, or SRX5800 platforms, select Monitor>Security>IDP>Status in the J-Web user interface, or enter the following CLI commands:
show security idp status
show security idp memory
Select Monitor>Security>IPS>Status in the J-Web user interface.
Table 53 summarizes key output fields in the IDP display.
Table 53: Summary of IDP Status Output Fields
Status of IDP
Displays the status of the current IDP policy.
Displays the time from when the IDP policy first began running on the system.
Displays the number of packets received and returned per second.
Displays the maximum number of packets received per second and the time when the maximum was reached.
Displays the aggregated throughput (kilobits per second) for the system.
Displays the maximum kilobits per second and the time when the maximum was reached.
Displays the delay, in microseconds, for a packet to receive and return by a node .
Displays the name of the current installed IDP policy.
|IDP Memory Status|
IDP Memory Statistics
Displays the status of all IDP data plane memory.
Displays the name of the PIC.
Total IDP Data Plane Memory (MB)
Displays the total memory space, in megabytes, allocated for the IDP data plane.
Displays the used memory space, in megabytes, for the data plane.
Displays the available memory space, in megabytes, for the data plane.