Known Issues
This section lists the known issues in hardware and software in Junos OS Release 16.2R2 for the EX Series.
For the most complete and latest information about known Junos OS defects, use the Juniper Networks online Junos Problem Report Search application.
High Availability (HA) and Resiliency
On EX9200 Virtual Chassis, in a rare scenario, GRES might not reach the ready state and might fail to start, because the Routing Engine does not receive the state ack message from the Packet Forwarding Engine after performing GRES. This is a timing issue. It might also stop Routing Engine resource releasing and then cause resource exhausting. Reboot the system if this problem occurs. PR1236882
Network Management
SNMP queries to retrieve jnxRpmResSumPercentLost will return the RPM/TWAMP probe loss percentage as an integer value whereas the precise value (including decimal points) can be retrieved through the CLI by using the following commands:
show services rpm probe-results
show services rpm twamp client probe-results
Platform and Infrastructure
On EX9208 switches, a DCD restart might disable the member links in an MC-LAG, resulting in traffic loss. PR1229001
Port Security
On an EX9200-6QS line card, storm control might not work for multicast traffic. PR1191611