Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation  Back up to About Overview 
ContentIndex
  
[+] Expand All
[-] Collapse All

No index entries found.

Migration, Upgrade, and Downgrade Instructions

This section contains the procedure to upgrade Junos OS, and the upgrade and downgrade policies for Junos OS for and T Series. Upgrading or downgrading Junos OS can take several minutes, depending on the size and configuration of the network.

Starting with Junos OS Release 15.1, in some of the devices, FreeBSD 10.x is the underlying OS for Junos OS instead of FreeBSD 6.1. This feature includes a simplified package naming system that drops the domestic and world-wide naming convention. However, in some of the routers, FreeBSD 6.1 remains the underlying OS for Junos OS. For more details about FreeBSD 10.x, see Understanding Junos OS with Upgraded FreeBSD.

Note: Starting in Junos OS Release 15.1F4, Junos OS (FreeBSD 10.x) is also available to customers in Belarus, Kazakhstan, and Russia. Customers in these countries need to use the limited encryption Junos image (“Junos Limited”) for the FreeBSD 10.x Junos OS.

Caution: This release introduces some behavior changes to the unified in-service software upgrade (ISSU) functionality for T Series routers. We do not recommend using unified ISSU to upgrade from an earlier Junos OS release to Junos OS Release 15.1. The request system software validate in-service-upgrade command, which allows the detection of any compatibility issues before actually issuing the request system software in-service-upgrade command to initiate unified ISSU, is not supported in Junos OS Release 15.1 while upgrading from earlier Junos OS releases.

Basic Procedure for Upgrading to Release 15.1F5

When upgrading or downgrading Junos OS, always use the jinstall package. Use other packages (such as the jbundle package) only when so instructed by a Juniper Networks support representative. For information about the contents of the jinstall package and details of the installation process, see the Installation and Upgrade Guide and Upgrading Junos OS with Upgraded FreeBSD.

Note: Before upgrading, back up the file system and the currently active Junos OS configuration so that you can recover to a known, stable environment in case the upgrade is unsuccessful. Issue the following command:

user@host> request system snapshot

The installation process rebuilds the file system and completely reinstalls Junos OS. Configuration information from the previous software installation is retained, but the contents of log files might be erased. Stored files on the routing platform, such as configuration templates and shell scripts (the only exceptions are the juniper.conf and ssh files) might be removed. To preserve the stored files, copy them to another system before upgrading or downgrading the routing platform. For more information, see the Junos OS Administration Library for Routing Devices.

Upgrading from Junos OS (FreeBSD 6.1) to Junos OS (FreeBSD 6.1)

Products impacted: All T Series routers and the MX80 and MX104.

Note: Customers in Belarus, Kazakhstan, and Russia must use the following procedure for all MX Series routers running Junos OS Release 15.1.

To download and install from Junos OS (FreeBSD 6.1) to Junos OS (FreeBSD 6.1):

  1. Using a Web browser, navigate to the All Junos Platforms software download URL on the Juniper Networks webpage:

    https://www.juniper.net/support/downloads/

  2. Select the name of the Junos OS platform for the software that you want to download.
  3. Select the release number (the number of the software version that you want to download) from the Release drop-down list to the right of the Download Software page.
  4. Select the Software tab.
  5. In the Install Package section of the Software tab, select the software package for the release.
  6. Log in to the Juniper Networks authentication system using the username (generally your e-mail address) and password supplied by a Juniper Networks representative.
  7. Review and accept the End User License Agreement.
  8. Download the software to a local host.
  9. Copy the software to the routing platform or to your internal software distribution site.
  10. Install the new jinstall package on the routing platform.

    Note: We recommend that you upgrade all software packages out of band using the console because in-band connections are lost during the upgrade process.

    • Customers in the United States and Canada, use the following command:
      user@host> request system software add validate reboot source/jinstall-15.1F5.11-domestic-signed.tgz
    • All other customers, use the following command:
      user@host> request system software add validate reboot source/jinstall-15.1F5.11-export-signed.tgz

    Replace source with one of the following values:

    • /pathname —For a software package that is installed from a local directory on the router.
    • For software packages that are downloaded and installed from a remote location:

      • ftp://hostname/pathname
      • http://hostname/pathname
      • scp://hostname/pathname (available only for Canada and U.S. version)

    The validate option validates the software package against the current configuration as a prerequisite to adding the software package to ensure that the router reboots successfully. This is the default behavior when the software package being added is a different release.

    Use the reboot command to reboot the router after the upgrade is validated and installed. When the reboot is complete, the router displays the login prompt. The loading process can take 5 to 10 minutes.

    Rebooting occurs only if the upgrade is successful.

Note: After you install a Junos OS Release 15.1F4 jinstall package, you cannot issue the request system software rollback command to return to the previously installed software. Instead, you must issue the request system software add validate command and specify the jinstall package that corresponds to the previously installed software.

Upgrade and Downgrade Support Policy for Junos OS Releases

Support for upgrades and downgrades that span more than three Junos OS releases at a time is not provided, except for releases that are designated as Extended End-of-Life (EEOL) releases. EEOL releases provide direct upgrade and downgrade paths—you can upgrade directly from one EEOL release to the next EEOL release even though EEOL releases generally occur in increments beyond three releases.

You can upgrade or downgrade to the EEOL release that occurs directly before or after the currently installed EEOL release, or to two EEOL releases before or after. For example, Junos OS Releases 10.0, 10.4, and 11.4 are EEOL releases. You can upgrade from Junos OS Release 10.0 to Release 10.4 or even from Junos OS Release 10.0 to Release 11.4. However, you cannot upgrade directly from a non-EEOL release that is more than three releases ahead or behind. For example, you cannot directly upgrade from Junos OS Release 10.3 (a non-EEOL release) to Junos OS Release 11.4 or directly downgrade from Junos OS Release 11.4 to Junos OS Release 10.3.

To upgrade or downgrade from a non-EEOL release to a release more than three releases before or after, first upgrade to the next EEOL release and then upgrade or downgrade from that EEOL release to your target release.

For more information on EEOL releases and to review a list of EEOL releases, see https://www.juniper.net/support/eol/junos.html .

Upgrading a Router with Redundant Routing Engines

If the router has two Routing Engines, perform the following Junos OS installation on each Routing Engine separately to avoid disrupting network operation:

  1. Disable graceful Routing Engine switchover (GRES) on the master Routing Engine, and save the configuration change to both Routing Engines.
  2. Install the new Junos OS release on the backup Routing Engine while keeping the currently running software version on the master Routing Engine.
  3. After making sure that the new software version is running correctly on the backup Routing Engine, switch over to the backup Routing Engine to activate the new software.
  4. Install the new software on the original master Routing Engine that is now active as the backup Routing Engine.

For the detailed procedure, see the Installation and Upgrade Guide .

Upgrading the Software for a Routing Matrix

A routing matrix can be either a TX Matrix router as the switch-card chassis (SCC) or a TX Matrix Plus router as the switch-fabric chassis (SFC). By default, when you upgrade software for a TX Matrix router or a TX Matrix Plus router, the new image is loaded onto the TX Matrix or TX Matrix Plus router (specified in the Junos OS CLI by using the scc or sfc option) and distributed to all line-card chassis (LCCs) in the routing matrix (specified in the Junos OS CLI by using the lcc option). To avoid network disruption during the upgrade, ensure the following conditions before beginning the upgrade process:

  • A minimum of free disk space and DRAM on each Routing Engine. The software upgrade will fail on any Routing Engine without the required amount of free disk space and DRAM. To determine the amount of disk space currently available on all Routing Engines of the routing matrix, use the CLI show system storage command. To determine the amount of DRAM currently available on all the Routing Engines in the routing matrix, use the CLI show chassis routing-engine command.
  • The master Routing Engines of the TX Matrix or TX Matrix Plus router (SCC or SFC) and all LCCs connected to the SCC or SFC are all re0 or are all re1.
  • The backup Routing Engines of the TX Matrix or TX Matrix Plus router (SCC or SFC) and all LCCs connected to the SCC or SFC are all re1 or are all re0.
  • All master Routing Engines in all routers run the same version of software. This is necessary for the routing matrix to operate.
  • All master and backup Routing Engines run the same version of software before beginning the upgrade procedure. Different versions of Junos OS can have incompatible message formats especially if you turn on GRES. Because the steps in the process include changing mastership, running the same version of software is recommended.
  • For a routing matrix with a TX Matrix router, the same Routing Engine model is used within a TX Matrix router (SCC) and within a T640 router (LCC) of a routing matrix. For example, a routing matrix with an SCC using two RE-A-2000s and an LCC using two RE-1600s is supported. However, an SCC or an LCC with two different Routing Engine models is not supported. We suggest that all Routing Engines be the same model throughout all routers in the routing matrix. To determine the Routing Engine type, use the CLI show chassis hardware | match routing command.
  • For a routing matrix with a TX Matrix Plus router, the SFC contains two model RE-DUO-C2600-16G Routing Engines, and each LCC contains two model RE-DUO-C1800-8G or RE-DUO-C1800-16G Routing Engines.

Best Practice: Make sure that all master Routing Engines are re0 and all backup Routing Engines are re1 (or vice versa). For the purposes of this document, the master Routing Engine is re0 and the backup Routing Engine is re1.

To upgrade the software for a routing matrix:

  1. Disable graceful Routing Engine switchover (GRES) on the master Routing Engine (re0), and save the configuration change to both Routing Engines.
  2. Install the new Junos OS release on the backup Routing Engine (re1) while keeping the currently running software version on the master Routing Engine (re0).
  3. Load the new Junos OS on the backup Routing Engine.
  4. After making sure that the new software version is running correctly on the backup Routing Engine (re1), switch mastership back to the original master Routing Engine (re0) to activate the new software.
  5. Install the new software on the new backup Routing Engine (re0).

For the detailed procedure, see the Routing Matrix with a TX Matrix Router Deployment Guide  PDF Document or the Routing Matrix with a TX Matrix Plus Router Deployment Guide  PDF Document.

Upgrading Using Unified ISSU

Caution: This release introduces some behavior changes to the unified in-service software upgrade (ISSU) functionality for MX Series routers andT Series routers. We do not recommend using unified ISSU to upgrade from an earlier Junos OS release to Junos OS Release 15.1.

Unified in-service software upgrade (ISSU) enables you to upgrade between two different Junos OS releases with no disruption on the control plane and with minimal disruption of traffic. Unified ISSU is only supported by dual Routing Engine platforms. In addition, graceful Routing Engine switchover (GRES) and nonstop active routing (NSR) must be enabled. For additional information about using unified ISSU, see the High Availability Feature Guide for Routing Devices .

Downgrading from Release 15.1

To downgrade from Release 15.1 to another supported release, follow the procedure for upgrading, but replace the 15.1 jinstall package with one that corresponds to the appropriate release.

Note: You cannot downgrade more than three releases. For example, if your routing platform is running Junos OS Release 11.4, you can downgrade the software to Release 10.4 directly, but not to Release 10.3 or earlier; as a workaround, you can first downgrade to Release 10.4 and then downgrade to Release 10.3.

For more information, see the Installation and Upgrade Guide.

Related Documentation

Modified: 2016-09-29