Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation  Back up to About Overview 
[+] Expand All
[-] Collapse All

No index entries found.

Known Behavior

This section contains the known behavior, system maximums, and limitations in hardware and software in Junos OS Release 15.1F4 for the MX Series and T Series.

General Routing

  • The following request commands are not available for the Routing Engine RE-S-X6-64G on the MX240, MX480, MX960, MX2010, and MX2020:
    • request system halt
    • request system partition
    • request system power off
    • request system power on

    The scope of functionality of the following commands is limited to Junos OS guest level:

    • request system reboot
    • request system snapshot
    • request system software add
    • request system zeroize

    You can use the following equivalent request vmhost commands to achieve the functionality:

    • request vmhost cleanup
    • request vmhost file-copy
    • request vmhost halt
    • request vmhost hard-disk-test
    • request vmhost power-off
    • request vmhost power-on
    • request vmhost reboot
    • request vmhost snapshot
    • request vmhost software abort
    • request vmhost software add
    • request vmhost software in-service-upgrade
    • request vmhost software rollback
    • request vmhost zeroize

    The output of the following show commands are modified for the Routing Engine RE-S-X6-64G:

    • show chassis environment routing-engine
    • show chassis hardware
    • show chassis hardware extensive
    • show chassis routing-engine
    • show system software

    The following new show commands are introduced for the Routing Engine RE-S-X6-64G:

    • show vmhost bridge
    • show vmhost crash
    • show vmhost hardware
    • show vmhost information
    • show vmhost logs
    • show vmhost netstat
    • show vmhost processes
    • show vmhost resource-usage
    • show vmhost snapshot
    • show vmhost status
    • show vmhost uptime
    • show vmhost version

    The following new configuration statements are introduced for the Routing Engine RE-S-X6-64G:

    • edit system processes app-engine-virtual-machine-management-service
    • edit vmhost
  • During deletion and restoration of scaled configurations on PTX5000, MX240, MX480, MX960, MX2010, and MX2020, error messages related to next hops are displayed.
  • The guest Junos OS and the host OS on the PTX5000, MX240, MX480, MX960, MX2010, and MX2020 use different time zones. Therefore, there is a difference between the timestamps in the system log files of Junos OS and the host OS. As a workaround, you can calculate the current difference between the time zones used by Junos OS and the host OS and work with logs that show this difference in time.
  • The configuration of the smartd process, which monitors the status of the disk on the host OS of PTX5000, MX240, MX480, MX960, MX2010, and MX2020, is not deleted completely even after you delete the configuration. When you configure the smart check feature, smartd continues to use parameters that were configured previously. Therefore, while enabling smart check, remember to configure the threshold values for smartd instead of retaining the default values that were previously configured.
  • FIFO handles of SSD-monitoring smartd are not cleared on the host OS after multiple commits or checks. Smartd stops working when the FIFO limit reaches a maximum. Therefore, we recommend that you do not change smartd configurations too often and perform SSD smart checks after long intervals of time. When the FIFO limit reaches a maximum, reboot the host OS.

Interfaces and Chassis

  • Starting in Junos OS Release 15.1F4, when interfaces are disabled on MPC7, the output of the show interfaces diagnostic optics command displays the following information under lane characteristics:
    Tx laser disabled alarm                   :  Off/On

Related Documentation

Modified: 2016-04-20