Help Center User GuideGetting Started
 
X
User Guide
Getting Started

Security J-Web Getting Started

Ready. Set. Let’s go!

Set up your Juniper Web Device Manager with these high-level steps and start managing your SRX Series devices.

Note 

  • Starting in Junos OS Release 19.2R1, a Getting Started panel appears by default when you log in to J-Web. If you select Don’t show this again, then you can access the panel using the help (?) icon.

  • Logical system users and tenant users with read only permissions can only view the configuration from the Getting Started panel.

Configure Logical Interface

Procedure

Add a logical interface to define both the physical properties of the link and the logical properties of a logical interface on the link. These interfaces act as a doorway through which traffic enters and exits a device.

To configure an interface port:

  1. Click Configure Interfaces from the Getting Started panel.

    The Ports page appears.

  2. Select an interface to add the logical interface.
  3. Click the add icon (+).

    The Add Interface page appears.

  4. Provide relevant data for all fields.
  5. Click OK to save the configuration and to return to the Ports page.

    A message appears to commit the configuration.

  6. Select Commit Options > Commit to commit the configuration.

    The commit successful message appears.

  7. Click OK to return to the Ports page.

Configure Security Zones

Procedure

Security zones are logical entities to which one or more interfaces are bound. Use zones to define one or more network segments requiring the regulation of inbound and outbound traffic through policies.

To configure a zone:

  1. Click Configure Security Zones from the Getting Started panel.

    The Zones/Screens page appears.

  2. Click the add icon (+).

    The Add Zone page appears.

  3. Provide relevant data for all fields.
  4. Click OK to save the configuration and to return to the Zones/Screens page.

    A message appears to commit the configuration.

  5. Select Commit Options > Commit to commit the configuration.

    The commit successful message appears.

  6. Click OK to return to the Zones page.

Configure Security Policies

Procedure

Use security policies to control traffic from a specified source to a specified destination using a specified service. The security policy applies the security rules to the transit traffic within a context (from-zone to to-zone).

To configure a security policy:

  1. Click Configure Firewall Policies from the Getting Started panel.

    The Rules page appears.

  2. Click the add icon (+).

    The Create Rule page appears.

  3. Provide relevant data for all fields.
  4. Click OK to save the configuration and to return to the Rules page.

    A message appears to commit the configuration.

  5. Select Commit Options > Commit to commit the configuration.

    The commit successful message appears.

  6. Click OK to return to the Rules page.

Configure NAT Policies

Procedure

Use Network Address Translation (NAT) functionality for translating IP addresses in Junos OS on the SRX Series devices.

  1. Click Configure NAT Policies from the Getting Started panel.

    The Source page appears.

    Note You can choose to configure source, destination, or static NAT.

  2. Click the add icon (+).

    The Add Rule Set page appears.

  3. Provide relevant data for all fields.
  4. Click OK to save the configuration and to return to your selected page.

    A message appears to commit the configuration.

  5. Select Commit Options > Commit to commit the configuration.

    The commit successful message appears.

  6. Click OK to return to your selected page.

Manage Your License

Procedure

Use license management to view the available licensed features, number of licenses used, installed, required, and license expiry details on your SRX Series device. Also, you can add, delete, update, or download the license keys.

Note This feature is not available for logical system users and tenant users.

To manage a license key:

  1. Click Manage Your License from the Getting Started panel.

    The License Management page appears. You can view the summary of the feature licenses.

  2. Choose any of the following steps to manage your licenses key:
    1. Click Add, provide relevant data for all fields, and then click OK to add a license key with the J-Web license manager.

    2. Select the check box of the license or licenses and then click Delete to delete one or more license keys with the J-Web license manager.

    3. Click Update to update the existing license key with the J-Web license manager.

    4. Click Update Trial to updates the trial license key with the J-Web license manager.

    5. Click Display Keys to display the license keys installed on the device with the J-Web license manager.

    6. Click Download Keys to download the license keys installed on the device with the J-Web license manager

Ask questions in TechWiki

Check documentation in TechLibrary