Help Center User GuideGetting Started
 
X
User Guide
Getting Started
Contents  

Firmware Upgrade Configuration Page Options

You can use J-Web Configure to upgrade the access point to new firmware.

Procedure

Before You Begin

The software to be loaded onto the access point is a tar file on a Windows PC. The file is first transferred from the PC to the SRX Series device, and then loaded onto the access point from the SRX Series device.

To upgrade software on an access point with the J-Web Configure page:

  1. Select Configure>Wireless LAN>Firmware upgrade.

    The Firmware Upgrade page displays a list of access points configured on the SRX Series Services Gateway. Upgrade the Access Point software with the information provided in as specified in Table 291

  2. When you enter a change in the Wireless LAN Configuration page, the change is stored but not committed to the configuration file on the device. At the same time, the following buttons appear in the global menu area at the top of the page (click the appropriate button):
    • Commit—All pending changes to the configuration are sent to the device and committed.

    • Compare—Show pending changes by comparing the pending configuration with the committed configuration on the device.

    • Discard—Discard pending changes.

      Note: These buttons only appear if you make a change in the configuration.

      Note: If you navigate to another configuration page or attempt to log out from the device when there are pending changes that have not been committed, you will be prompted to take action on the pending changes. If you log in to a device and there are pending changes that have not yet been committed, a popup window notifies you that there are changes from a previous session.

Table 291: Firmware Upgrade Configuration Options

Field

Function

Action

Upgrade Options

Select an Access Point

Displays a list of access points configured on the SRX Series Services Gateway in the drop-down list.

Select an Access Point from the list.

Firmware Path

Displays the name of the tar file to be uploaded to the access point.

Enter the name of the tar file to be uploaded to the access point.

Browse

Navigates to the file to be uploaded to the access point.

Navigate to the file.

Upgrade Firmware

Uploads and installs a new firmware on a specific Access Point

Click the tab to upgrade software.

Note: The device will take 3-4min to upgrade and reboot the AP, after clicking the tab to upgrade.

Related Documentation

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit