Help Center User GuideGetting Started
 
X
User Guide
Getting Started
Contents  

Monitoring Screen Counters

Purpose

View screen statistics for a specified security zone.

Action

Select Monitor>Security>Screen Counters in the J-Web user interface, or enter the following CLI command:

show security screen statistics zone zone-name

Table 53 summarizes key output fields in the screen counters display.

Table 53: Summary of Key Screen Counters Output Fields

Field

Values

Additional Information

Zones  

ICMP Flood

Internet Control Message Protocol (ICMP) flood counter.

An ICMP flood typically occurs when ICMP echo requests use all resources in responding, such that valid network traffic can no longer be processed.

UDP Flood

User Datagram Protocol (UDP) flood counter.

UDP flooding occurs when an attacker sends IP packets containing UDP datagrams with the purpose of slowing down the resources, such that valid connections can no longer be handled.

TCP Winnuke

Number of Transport Control Protocol (TCP) WinNuke attacks.

WinNuke is a denial-of-service (DoS) attack targeting any computer on the Internet running Windows.

TCP Port Scan

Number of TCP port scans.

The purpose of this attack is to scan the available services in the hopes that at least one port will respond, thus identifying a service to target.

ICMP Address Sweep

Number of ICMP address sweeps.

An IP address sweep can occur with the intent of triggering responses from active hosts.

IP Tear Drop

Number of teardrop attacks.

Teardrop attacks exploit the reassembly of fragmented IP packets.

TCP SYN Attack

Number of TCP SYN attacks.

IP Spoofing

Number of IP spoofs.

IP spoofing occurs when an invalid source address is inserted in the packet header to make the packet appear to come from a trusted source.

ICMP Ping of Death

ICMP ping of death counter.

Ping of death occurs when IP packets are sent that exceed the maximum legal length (65,535 bytes).

IP Source Route

Number of IP source route attacks.

TCP Land Attack

Number of land attacks.

Land attacks occur when attacker sends spoofed SYN packets containing the IP address of the victim as both the destination and source IP address.

TCP SYN Fragment

Number of TCP SYN fragments.

TCP No Flag

Number of TCP headers without flags set.

A normal TCP segment header has at least one control flag set.

IP Unknown Protocol

Number of unknown Internet protocols.

IP Bad Options

Number of invalid options.

IP Record Route Option

Number of packets with the IP record route option enabled.

This option records the IP addresses of the network devices along the path that the IP packet travels.

IP Timestamp Option

Number of IP timestamp option attacks.

This option records the time (in Universal Time) when each network device receives the packet during its trip from the point of origin to its destination.

IP Security Option

Number of IP security option attacks.

IP Loose route Option

Number of IP loose route option attacks.

This option specifies a partial route list for a packet to take on its journey from source to destination.

IP Strict Source Route Option

Number of IP strict source route option attacks.

This option specifies the complete route list for a packet to take on its journey from source to destination.

IP Stream Option

Number of stream option attacks.

This option provides a way for the 16-bit SATNET stream identifier to be carried through networks that do not support streams.

ICMP Fragment

Number of ICMP fragments.

Because ICMP packets contain very short messages, there is no legitimate reason for ICMP packets to be fragmented. If an ICMP packet is so large that it must be fragmented, something is amiss.

ICMP Large Packet

Number of large ICMP packets.

TCP SYN FIN Packet

Number of TCP SYN FIN packets.

TCP FIN without ACK

Number of TCP FIN flags without the acknowledge (ACK) flag.

TCP SYN-ACK-ACK Proxy

Number of TCP flags enabled with SYN-ACK-ACK.

To prevent flooding with SYN-ACK-ACK sessions, you can enable the SYN-ACK-ACK proxy protection screen option. After the number of connections from the same IP address reaches the SYN-ACK-ACK proxy threshold, Junos OS rejects further connection requests from that IP address.

IP Block Fragment

Number of IP block fragments.

See Also

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit