Help Center User GuideGetting Started
 
X
User Guide
Getting Started
Contents  

Monitoring Firewall Authentication

Purpose

Use the monitoring functionality to view the firewall authentication page.

Action

To monitor firewall authentication, select Monitor>Security>Firewall Authentication in the J-Web user interface if you are using SRX5400, SRX5600, or SRX5800 platforms.

Or

Select Monitor>Security>Authentication>Firewall Auth in the J-Web user interface.

Meaning

Table 65 summarizes key output fields in the firewall authentication page.

Table 65: Firewall Authentication Monitoring Page

Field

Value

Additional Information

Virtual Chassis Member

Displays the list of virtual chassis member.

Select one of the virtual chassis members listed.

Refresh Interval (30 sec)

Displays the time interval set for page refresh.

Select the time interval from the drop-down list.

Refresh

Displays the option to refresh the page.

Clear

Provides an option to clear the monitor summary.

Click Clear to clear the monitor summary.

User Table

ID

Displays the authentication identification number.

Source IP

Displays the IP address of the authentication source.

Age

Displays the idle timeout for the user.

Status

Displays the status of authentication (success or failure).

User

Displays the name of the user.

History Table

ID

Displays the identification number.

Source IP

Displays the IP address of the authentication source.

Duration

Displays the authentication duration.

Status

Displays the status of authentication (success or failure).

User

Displays the name of the user.

See Also

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit