Help Center User GuideGetting Started
User Guide
Getting Started

Monitoring RIP Routing Information


View RIP routing information, including a summary of RIP neighbors and statistics.


Select Monitor>Routing>RIP Information in the J-Web user interface, or enter the following CLI commands:

Table 79 summarizes key output fields in the RIP routing display in the J-Web user interface.

Table 79: Summary of Key RIP Routing Output Fields



Additional Information

RIP Statistics

Protocol Name

The RIP protocol name.

Port number

The port on which RIP is enabled.

Hold down time

The interval during which routes are neither advertised nor updated.

Global routes learned

Number of RIP routes learned on the logical interface.

Global routes held down

Number of RIP routes that are not advertised or updated during the hold-down interval.

Global request dropped

Number of requests dropped.

Global responses dropped

Number of responses dropped.

RIP Neighbors  


Tab used to view the details of the interface on which RIP is enabled.


Name of the RIP neighbor.

This value is the name of the interface on which RIP is enabled. Click the name to see the details for this neighbor.


State of the RIP connection: Up or Dn (Down).

Source Address

Local source address.

This value is the configured address of the interface on which RIP is enabled.

Destination Address

Destination address.

This value is the configured address of the immediate RIP adjacency.

Send Mode

The mode of sending RIP messages.

Receive Mode

The mode in which messages are received.

In Metric

Value of the incoming metric configured for the RIP neighbor.

Related Documentation

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      

Additional Comments

800 characters remaining

May we contact you if necessary?


Need product assistance? Contact Juniper Support