Monitoring IDP Status

View detailed information about the IDP Status, Memory, Counters, Policy Rulebase Statistics, and Attack table statistics.

To view Intrusion Detection and Prevention (IDP) table information, do one of the following:

If you are using SRX5400, SRX5600, or SRX5800 platforms, select Monitor>Security>IDP>Status in the J-Web user interface, or enter the following CLI commands:
- show security idp status
- show security idp memory
Select Monitor>Security>IPS>Status in the J-Web user interface.

Table 59 summarizes key output fields in the IDP display.

Table 59: Summary of IDP Status Output Fields

Field	Values	Additional Information
IDP Status
Status of IDP	Displays the status of the current IDP policy.	–
Up Since	Displays the time from when the IDP policy first began running on the system.	–
Packets/Second	Displays the number of packets received and returned per second.	–
Peak	Displays the maximum number of packets received per second and the time when the maximum was reached.	–
Kbits/Second	Displays the aggregated throughput (kilobits per second) for the system.	–
Peak Kbits	Displays the maximum kilobits per second and the time when the maximum was reached.	–
Latency (Microseconds)	Displays the delay, in microseconds, for a packet to receive and return by a node .	–
Current Policy	Displays the name of the current installed IDP policy.	–
IDP Memory Status
IDP Memory Statistics	Displays the status of all IDP data plane memory.	–
PIC Name	Displays the name of the PIC.	–
Total IDP Data Plane Memory (MB)	Displays the total memory space, in megabytes, allocated for the IDP data plane.	–
Used (MB)	Displays the used memory space, in megabytes, for the data plane.	–
Available (MB)	Displays the available memory space, in megabytes, for the data plane.	–