Help Center User GuideGetting Started
 
X
User Guide
Getting Started
Contents  

Maintaining System Snapshots

Procedure

  1. Select Maintain>Snapshot in the J-Web user interface if you are using SRX5400, SRX5600, or SRX5800 platform.

    Or

    Select Administration>Devices>Snapshot in the J-Web user interface.

    The Snapshot page appears. Table 275 explains the contents of this page.

  2. Click Snapshot — Creates a boot device on an alternate medium.
  3. Click one :
    • OK — Performs the system snapshot to an medium.

    • Cancel — Cancels the system snapshot to another medium.

Enter the information specified in Table 275 to maintain the secure router.

Table 275: Snapshot Maintenance Options

FieldFunctionAction

Target Media

Specifies the boot device to copy the snapshot to.

Note: You cannot copy software to the active boot device.

The available options for a boot device that is not the active boot device:

  • internal — Copies software to the internal media.

  • usb — Copies software to the device connected to the USB port.

Select an option.

Factory

Copies only the default files that were loaded on the internal media when it was shipped from the factory, plus the rescue configuration if one has been set.

Note: After a boot device is created with the default factory configuration, it can operate only in an internal media slot.

Select the check box.

Partition

Partitions the medium. This process is usually necessary for boot devices that do not already have software installed on them.

Select the check box.

Related Documentation

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit