Help Center User GuideGetting Started
 
X
User Guide
Getting Started
Contents  

Date and Time Configuration Page Options

Procedure

  1. Select Configure>System Properties>Date and Time in the J-Web user interface if you are using SRX5400, SRX5600, or SRX5800 platform.

    Or

    Select Configure>Device Setup>Basic Settings>Date Time in the J-Web user interface.

    The Date and Time configuration page appears.

  2. (Junos OS Release 18.3R1 and later releases) Select Configure>Device Setup>Basic Settings>Date & Time Details in the J-Web user interface. Table 112 explains the contents of this page.
  3. Click one:
    • Save—Saves all the basic settings configuration and returns to the main configuration page.

      Note For all the configuration options under Basic Settings:

      • Tool tip on the right-side represents different icons for notifications, validation errors, and successful configuration.

      • When you make a configuration change and navigate to a different page without saving it, a pop-up message is displayed to save the configuration.

    • Commit Options>Commit—Commits the configuration and returns to the main configuration page.

    • Cancel—Cancels all your entries and returns to the main configuration page.

Table 112: Date and Time Configuration Details

Field FunctionAction

Time Zone

Specifies the time zone in which the router resides.

Select a time zone from the list.

Current date/time

Displays the current date and time.

Time Source

Specifies which method the device should use to set the system time.

 

Sync with NTP Server—Synchronizes the system time with the NTP server that you select. The available options are:

  • Add

  • Edit.

  • Delete

Select an option.

  • To add an NTP server, click Add. Then, enter the NTP server, key, and version in the Add NTP Server dialog box, and click OK.

  • To edit the settings for an existing NTP server, select it and click Edit or right-click on it and click Edit Row. Then, edit the key and version in the Edit NTP Server dialog box, and click OK.

  • To delete an existing NTP server, select it and click Delete or right-click on it and click Delete Row, and click OK.

Sync with Computer Time—Uses the computer that you are currently logged into to determine the system time for the device.

When you select this option, the PC time that will be used is displayed in the Current Date & Time field.

Manual Configure Time—Enables you to manually select the date and time for the device.

Note: After you configure the time manually, the session will expire. Log in to J-Web.

Set the date and time using the calendar pick tool and time fields.

See Also

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit