Help Center User GuideGetting Started
User Guide
Getting Started

Content Filtering Configuration Page Options


  1. Select Configure>Security>UTM>Content Filtering.

    The Content Filtering configuration page appears. Table 214 explains the contents of this page.

  2. Click one:
    • Add or +—Adds a new or duplicate content-filtering profile configuration. Enter information as specified in Table 215.

    • Edit or /—Edits the selected content-filtering configuration.

    • Delete or X—Deletes the selected content-filtering configuration.

  3. Click one:
    • OK—Saves the configuration and returns to the main configuration page.

    • Cancel—Cancels your entries and returns to the main configuration page.

Table 214: Content Filtering Configuration Page



Profile Name

Displays the unique name of the antispam profile.

Permit Command List

Displays the permitted protocol command name.

Block Command List

Displays the blocked protocol command.

Notification Options Type

Displays the notification type opted.

Table 215: Add Content Filtering Configuration Details

Field FunctionAction

Profile Name

Specifies a unique name for the antivirus profile.

Enter a unique name for the antispam profile.

Permit Command List

Specifies the permitted protocol command.

Select the protocol command name to be permitted from the list.

Block Command List

Specifies the blocked protocol command name. By blocking certain commands, traffic can be controlled on the protocol command level.

Select the protocol command name to be blocked from the list.

Block Extension List

Specifies the blocked extension list name.

Select the extension to be blocked from the list.

Block MIME List

Specifies the blocked MIME.

Select the MIME type from the list.

Block MIME Exception List

Specifies the blocked MIME list.

Select the MIME type to be excluded from the list.

Block Content Type

Specifies the blocked content type.

Select the content type to be blocked.

Notification Options

Notification Type

Specifies the type of notification sent when a content block is triggered.

Select the Protocol Only or the Message check box.

Notification Mail Sender

Specifies that when a virus is detected and a content block is triggered, an e-mail is sent to the administrator.

Select the Notify Mail Sender check box.

Custom Notification Message

Specifies the customized message text for the content-block notification.

Enter the text for this custom notification message (if you are using one).

See Also

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      

Additional Comments

800 characters remaining

May we contact you if necessary?


Need product assistance? Contact Juniper Support