Help Center User GuideGetting Started
 
X
User Guide
Getting Started
Contents  

Assign to Interfaces Configuration Page Options

Procedure

  1. Select Configure>Filters>Assign to Interfaces in the J-Web user interface if you are using SRX5400, SRX5600, or SRX5800 platforms.

    Or

    Select Configure>Security>Firewall Filters>Assign to Interfaces in the J-Web user interface.

    The Assign to Interfaces configuration page appears.

  2. Click one:
    • Add—Adds a new or duplicate assign to interfaces configuration. Enter information as specified in Table 255.

    • Edit—Edits the selected assign to interfaces configuration.

    • Delete—Deletes the selected assign to interfaces configuration.

  3. Click one:
    • OK—Saves the configuration and returns to the main configuration page.

    • Commit Options>Commit—Commits the configuration and returns to the main configuration page.

    • Cancel—Cancels your entries and returns to the main configuration page.

Table 255: Add Assign to Interfaces Configuration Details

Field FunctionAction
Firewall Filters

Logical Interface Name

Displays the logical interfaces on a router. Allows you to apply IPv4 and IPv6 firewall filters to packets received on the interface and packets transmitted from the interface.

The options available are:

  • To apply an input firewall filter, follow instructions in the input firewall filters section.

  • To apply an output firewall filter, follow instructions in the ouput firewall filters section.

Select an interface name.

Link State

Displays the status of the logical interface.

Input Firewall Filters

Displays the input firewall filter applied on an interface. This filter evaluates all packets received on the interface.

Output Firewall Filters

Displays the output firewall filter applied on an interface. This filter evaluates all packets transmitted from the interface.

Input Firewall Filters

IPv4 Input Filter

IPv6 Input Filter

Allows you to apply an input firewall filter to an interface. This filter evaluates all packets received on the interface.

Select the name of the firewall filter from the list.

Output Firewall Filters

IPv4 Output Filter

IPv6 Output Filter

Allows you to apply an output firewall filter to an interface. This filter evaluates all packets received on the interface.

Select the name of the firewall filter from the list.

See Also

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit