The VLAN configuration page appears.
OK—Saves the configuration and returns to the main configuration page.
Cancel—Cancels your entries and returns to the main configuration page.
Remove—Removes the selected interface from the list.
Table 292: VLAN Configuration Details
| Field | Function | Action |
| VLAN list | ||
VLAN Name | Specifies the name of the VLAN. | Displays the name of the configured VLAN. |
Description | Specifies information about the VLAN. | Displays the description of the VLAN. |
VLAN ID | Specifies a VLAN identifier to include in the packets forwarded on the VLAN. | Displays the VLAN ID details.
|
Routing Interface | Specifies a routing interface to include in a VLAN. | Displays the name of the integrated routing and bridging (IRB) interface to include in the VLAN. |
| Global Options | ||
| MAC Learning Options | ||
Global MAC Limit | Limits the number of media access control (MAC) addresses learned from the logical interfaces on the router. | Enter a value in the range of 20 through 131071 to specify the limit for MAC addresses. The default value is 131071. |
Packet Action | Specifies that packets for new source MAC addresses be dropped after the MAC address limit is reached. | Select an option. The default option is disabled. |
No Global Mac Learning | Activates or deactivate the option. | Select the check box to activate this option. |
| Flow Options | ||
Set 802.1D BPDU flooding | Sets 802.1D BPDU flooding | Select the check box to activate this option. |
| Non IP Traffic | ||
Allow | Allows non-IP traffic. | Select the radio button. |
Block | Blocks non-IP traffic. | Select the radio button. |
| Stop IP flooding and send ICMP/ARP (Select the check box to activate this option.) | ||
No trace route | Allows the device to discover the destination MAC address for a unicast packet if the destination IP address is in the same subnetwork as the ingress IP address. | Select the check box to activate this option. |
| Add VLAN | ||
| General | ||
VLAN Name | Specifies the name of the VLAN. | Configure Layer 2 learning and forwarding properties for a VLAN. |
Description | Specifies the VLAN information. | Enter a description for the VLAN configured. |
Routing Interfaces | Specifies a routing interface to include in a VLAN. | Enter the name of the integrated routing and bridging (IRB) interface to include in the VLAN. The format of the interface name is irb.x, where x is the unit number of the interface you configured at the [edit interfaces irb] hierarchy level. |
VLAN ID | Specifies a VLAN identifier to include in the packets forwarded on the VLAN. | Enter a valid VLAN identifier. If you configure multiple VLANs with a valid VLAN identifier, you must specify a unique VLAN identifier for each VLAN. |
| VLAN ID List | ||
VLAN ID List | Displays a list of valid VLAN identifiers. A VLAN is created for each VLAN identifier in the list. | Add a new VLAN ID to the list or remove a VLAN ID from the list. |
| Add VLAN ID | ||
| Add VLAN Id/List | ||
VLAN ID | Specifies a VLAN identifier to include in the packets forwarded on the VLAN. | Check the radio button and enter a valid and unique VLAN identifier. |
VLAN List | Specifies the VLAN list. | Check the radio button and enter a valid VLAN list value. |
| L2 Interfaces | ||
L2 Interfaces | Displays the L2 Interface that is configured. | Add a new interface. Edit or remove the existing interface. |
| Add L2 Interfaces | ||
Interface name | Specifies the configured interface. | Configure a new interface under the VLAN. |
| Static MAC Address | ||
| Add Static MAC Address | ||
Mac Address | Specifies the Mac address of the interface. | Assign a Mac address to the newly added interface. |
Fast Ethernet Interfaces Configuration Page Options
Gigabit Ethernet Interfaces Configuration Page Options
Fast Ethernet Interfaces Configuration Page Options
Gigabit Ethernet Interfaces Configuration Page Options