Help Center User GuideGetting Started
User Guide
Getting Started

Application Tracking Configuration Page Options


  1. Select Configure>Security Objects>App Tracking in the J-Web user interface.

    The Application Tracking configuration page appears. Table 198 explains the contents of this page.

  2. Click Save to save the configuration.
  3. Click Cancel to remove all the entries of the configuration.

Table 198: Application Tracking Configuration Page

Application Tracking

Application tracking

Enables or disables application tracking.

Select this option to enable application tracking.

Logging Type

You can set the following:

  • Log as session(s) created—Generates a log message when a session is created. By default, this option is disabled.

  • Delay logging first session(s)—Enables you to specify the length of time that must pass before the first log message is created. The default is 1 minute.

Select an option.

First Update Interval (min)

Interval when the first update message is sent (minutes).

Use the up/down arrow to set the interval time.

Session Update Interval (min)

Enables you to set the interval at which update messages are sent. Default is 5 minutes.

Use the up/down arrow to set the interval time.

Application Tracking By Zone

Lists the available zones.

  • To enable application tracking, select the zone and click the right arrow to move it to the tracking enabled list.

  • To disable application tracking, select the zone and then click the left arrow to move the zone back into the available list.

See Also

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      

Additional Comments

800 characters remaining

May we contact you if necessary?


Need product assistance? Contact Juniper Support