The IGMP Snooping configuration page appears. Table 295 explains the contents of this page.
Add—Adds a new or duplicate IGMP snooping configuration. Enter information as specified in Table 296.
Edit—Edits a selected IGMP snooping configuration.
Delete—Deletes the selected IGMP snooping configuration.
Note: If you delete a configuration, the VLAN configuration for all the associated interfaces is also deleted.
Disable Vlan—Disables IGMP snooping on the selected VLAN.
OK—Saves the configuration and returns to the main configuration page.
Commit Options>Commit—Commits the configuration and returns to the main configuration page.
Cancel—Cancels your entries and returns to the main configuration page.
Table 295: IGMP Snooping Configuration Page
Field | Function |
|---|---|
VLAN Name | Displays the VLAN on which IGMP snooping is enabled. |
Status | Displays the status of the VLAN. |
| Details of VLAN | |
Immediate Leave | Displays whether the Immediate Leave option is enabled. |
Query Interval | Displays the frequency, in seconds, at which the switch sends host-query timeout messages to a multicast group. |
Query Last Member Interval | Displays the interval, in seconds, between group-specific query timeout messages sent by the switch. |
Query Response Interval | Displays the duration, in seconds, the switch waits to receive a response to a specific query message from a host. |
Robust Count | Displays the number of timeout intervals that the switch waits before timing out a multicast group. |
Interfaces List | Displays the interface that is configured as a switching interface. |
Table 296: Add IGMP Snooping Configuration Details
Field | Function | Action |
|---|---|---|
VLAN Name | Specifies the VLAN on which IGMP snooping has to be enabled. | Select the VLAN from the list. |
Immediate Leave | Specifies to immediately remove a multicast group member from an interface when it receives a Leave message from that interface and to suppress the sending of any group-specific queries for the multicast group. | To enable the option, select the check box. To disable the option, clear the check box. |
Query Interval | Specifies how frequently, in seconds, the switch sends host-query timeout messages to a multicast group. | Enter a value from 1 through 1024 seconds. |
Query Last Member Interval | Specifies the interval, in seconds, l between group-specific query timeout messages sent by the switch. | Enter a value from 1 through 1024 seconds. |
Query Response Interval | Specifies the duration, in seconds, that the switch waits to receive a response to a specific query message from a host. | Enter a value from 1 through 25 seconds. |
Robust Count | Specifies the number of timeout intervals that the switch waits before timing out a multicast group. | Enter a value from 2 through 10. |
Interfaces List | Specifies to statically configure an interface as a switching interface to receive multicast traffic. | Procedure
|