Use the monitoring functionality to view the alarms page.
To monitor alarms, select one of the following in the J-Web user interface:
If you are using SRX5400, SRX5600, or SRX5800 platforms, select Monitor>Events and Alarms>View Alarms.
Select Monitor>Alarms>View Alarms.
Table 7 summarizes key output fields in the alarms page.
Table 7: Alarms Monitoring Page
Field | Value | Additional Information |
|---|---|---|
| Alarm Filter | ||
Alarm Type | Specifies the type of alarm to monitor:
| — |
Severity | Specifies the alarm severity that you want to monitor
| — |
Description | Enter a brief synopsis of the alarms you want to monitor. | — |
Date From | Specifies the beginning of the date range that you want to monitor. Set the date using the calendar pick tool. | — |
To | Specifies the end of the date range that you want to monitor. Set the date using the calendar pick tool. | — |
Go | Executes the options that you specified. | — |
Reset | Clears the options that you specified. | — |
Alarm Details | Displays the following information about each alarm:
| — |
Monitoring Active Alarms on a Device
Monitoring Events
Monitoring Active Alarms on a Device
Monitoring Events
© 2018 Juniper Networks, Inc. All rights reserved