Deploying the Access Profile to SRX Series Devices

To deploy the access profile to SRX Series devices:

Select Configure > User Firewall Management > Access Profile.
The Access Profile page appears.
Select the access profile that you want to deploy, and click Update.
The Update Access Profile page appears. See Table 1 for more information.
Select the required SRX Series device to deploy the access profile, and click Update.
A new job is created.
Click the job ID to see the update status.
The Job Management page appears showing the state of the updated job. You can also view the deployed access profile information under the Parameters column.

Table 1: Update Access Profile Page Fields

Column Name	Description
Device Name	Name of the SRX Series device.
Configuration	The access profile configuration can be viewed in either CLI or XML by clicking View.
Configuration Status	Configuration status of the device. The different configuration states for a device are as follows: Synchronizing—During the device update, the status is shown as Synchronizing. Sync Failed—The synchronization operation failed. In Sync—The synchronization operation completed successfully; Security Director and the device are synchronized.
Connection Status	Connection status of the device. The status shows either UP or Down.
Domain	Domain of the user.
Device IP	IP address of the device.
Platform	Platform of the device. For example, SRX Series, vSRX.
OS Version	Junos OS version running on the device.