Using Generated Alerts
Use the Generated Alerts page to view the system event‐based alerts in response to a configured alert definition. The generated alerts help you to identify problems that appear in your monitored network environment. You can view statistics such as the number of critical and non‐critical alerts.
Before You Begin
Read the Alerts and Alarms Overview topic.
Review the Generated Alerts main page for an understanding of existing generated alarms. See Alert Definitions Main Page Fields for field descriptions.
You must add the following configuration to the managed SRX devices:
set snmp trap-group sdfm version allset snmp trap-group sdfm destination-port 10164set snmp trap-group sdfm categories authenticationset snmp trap-group sdfm categories chassisset snmp trap-group sdfm categories linkset snmp trap-group sdfm categories routingset snmp trap-group sdfm categories startupset snmp trap-group sdfm categories rmon-alarmset snmp trap-group sdfm categories vrrp-eventsset snmp trap-group sdfm categories configurationset snmp trap-group sdfm categories servicesset snmp trap-group sdfm categories chassis-clusterset snmp trap-group sdfm categories sonet-alarmsset snmp trap-group sdfm targets x.x.x.x (eth0 IP of space)
To use the Generated Alerts page:
- Select Monitor > Alerts & Alarms > Alerts. The Alerts page appears.
- Use the guidelines provided in Table 1 to learn about the page.
Table 1: Generated Alerts
Action | Guidelines |
---|---|
Jump to Event Viewer | Select the generated alert and then right‐click or click More > Jump to Events and Logs. The corresponding events that triggered the alert are displayed. |
Detail View | Select the generated alert and then right-click or click More > Detail View. |
Clear All Selections | Select the generated alert and then right-click or click More > Clear All Selections. |