Assigning Security Devices to Domains

You can assign devices to domains from the Security Devices page. By default, devices belong to the domain in which you are present when you run the device discovery profile.

1. Select Devices > Security Devices.

   The Security Devices page appears.

2. Select the devices that you want to assign to one or more domains. From the More or right-click menu, select Assign Device to Domain.

   The Assign Device to Domains page appears, displaying the list of domains to which you can assign the devices.

3. Select one or more domains by clicking the check boxes corresponding to the domains.
4. Specify whether warnings should be ignored for logical systems or tenant systems by selecting the Ignore Warnings check box.
5. Click Assign.

   The Assign Objects to Domain Status page appears, displaying the status of the domain assignment.

   Note

   Although the status of the domain assignment is displayed as success, when the Ignore Warnings check box is selected it is possible that the selected devices are not assigned to the domain. You can verify if the assign to domain action was successful or not by viewing the corresponding audit log entry in the Audit Log page in Junos Space Network Management Platform. If the assignment was unsuccessful, you can find out the reasons from the audit log entry, rectify the problem, and retry the assignment.

6. Click OK.

   You are returned to the Security Devices page.