Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Add JSA Log Collector Node to Security Director

 

You must deploy Juniper Secure Analytics (JSA) as a log collector and then add it to Security Director to view the log data in the Dashboard, Events and Logs, Reports, and Alerts pages.

Before You Begin

  • Deploy JSA as a Log Collector.

  • Configure system log and security logging for the devices managed by Junos Space Security Director from Devices > Security Devices > Modify Configuration.

  • While adding SRX firewall as a log source in JSA or QRadar, set the log source type to Juniper Junos Platform and not Juniper SRX Series Services Gateway.

  • You must have the recent version of Juniper Junos Device Support Module (DSM) installed on JSA or QRadar.

  • After upgrading Log Collector, database password will reset to default credentials, that is, admin/abc123. You must re-configure the database password after Log Collector upgrade before adding the Log Collector node to Security Director.

To add Log Collector to Security Director:

  1. From the Security Director user interface, select Administration > Logging Management > Logging Nodes, and click the plus sign (+).

    The Add Logging Node page appears.

  2. Choose the Log Collector type as Juniper Secure Analytics.
  3. Click Next.
  4. Complete the configuration for JSA Node.Caution

    For JSA, provide the admin credentials that is used to log in to the JSA console.

  5. Click Next.

    The certificate details are displayed.

  6. Click Finish.
  7. Review the summary of configuration changes from the summary page and click Edit to modify the details, if required.
  8. Click OK to add the node.

    A new logging node with your configuration is added. To verify that the node is configured correctly, click Logging Management to check the status of the node.

To remove an existing Security Director Log Collector and add JSA as a Log Collector:

  1. Select Administration > Logging Management > Logging Nodes.
  2. Select the existing Security Director Log Collector and click the delete icon to delete Security Director Log Collector node.
  3. Click the + icon to add JSA as a Log Collector.
  4. Configure the SRX Series devices to stop sending logs to Security Director Log Collector, and ensure that logs are sent to the JSA node.

Related Documentation