Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Creating a Cross Provisioning Platform Service Order for Canoga Perkins NIDs

 

Before you create a service order, you must:

  • Import into the system the scripts that define the Juniper Networks devices.

  • Import into the system the scripts that define Canoga Perkins NIDs.

  • Create the service definition upon which to base the service order.

To create a Cross Provisioning Platform service order:

  1. In the Cross Provisioning Platform task pane, select CPP > Service Orders.

    The Service Orders window appears.

  2. Click the + button.

    The Create CPP Service Order window appears.

  3. In the General Settings section, select a Canoga Perkins service definition that you have created.Note

    The value in the ID field is associated with a service definition. This identifier can be used when you are searching for a particular service definition while creating a device configlet order. You can search the service definition by its name, type or unique ID. You can modify the ID only during the migration of old service definition IDs.

  4. In the Order Description field, enter a description of the service that distinguishes its operation from others.
  5. Click Next.

    The Endpoint Settings window appears.

    Note

    The following representation of the Endpoint Settings window is a sample only. The fields displayed in this window are dependent based on scripts that are associated with the service definition on which the service order is based.

  6. For a Canoga Perkins NID, enter information for NID parameters in the NID Settings tab according to the descriptions in the following table:

    Parameter

    Description

    EVC ID

    Enter Ethernet virtual connection (EVC) ID of the specific NID endpoint.

    Site Name

    Select a Canoga Perkins NID from the list of NIDs displayed.

    UNI Port

    Select a UNI port from the list of ports displayed.

    Policer Bandwidth Profile

    Select a policy bandwidth profile from the list.

    This list is based on the device family type that you have selected in the Site Name field.

    CVID

    Specify the CVID.

    Note: The maximum value for this field is 4095.

    Multiplexing

    Select one of the option:

    • SERVICE_MUX

    • ALL_TO_ONE

    COS

    Select one of the option:

    • STD

    • PRI

    • MCOS

  7. Click Create.
  8. (Optional) Click Create More to provision additional endpoints.

The service order is created.

After you create a service order, you must deploy the service order. For more information about deploying a service order, see Deploying a Service Order.

Related Documentation