Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Policy Enforcer Log File Locations

 

The following Policy Enforcer configuration settings files are located under /srv/feeder/etc/log:

Note

Do not edit these files unless instructed by the Juniper Networks Technical Assistance Center (JTAC).

  • controller_log.yml—Defines the format for the controller.log file. For example, message and date format and maximum file size.

  • feed_collector_log.yml—Defines the format for the feed_collector.log file. For example, message and date format and maximum file size.

  • feed_provider_log.yml— Defines the format for the feed_provider.log file. For example, message and date format and maximum file size.

The following Policy Enforcer log files are located under /srv/feeder/log. By default, a maximum of 10 files are created for each log file. For example, controller.log, controller.log.1, controller.log.2, etc. After 10 files are created, the oldest file (in this example, controller.log) is overwritten next.

  • controller.log—Contains log messages for the interaction of Security Director with Policy Enforcer.

  • feed_collector.log—Contains log messages for the downloading of feeds.

  • feed_provider.log—Contains log messages for distributing feeds to the SRX Series devices.

The following Policy Enforcer log files are located under /var/log:

  • prepare_vm.log—Contains information about your Policy Enforcer software installation.

  • pe_upgrade.log—Contains information about your Policy Software software upgrade.