Help Center User GuideGetting StartedFAQRelease Notes
 
X
User Guide
Getting Started
FAQ
Release Notes
Contents  

Creating Port Sets

Use the Port Set page to group a set of ports or port ranges. These port sets are referenced using NAT rules as source and destination ports of NAT policies.

Before You Begin

Procedure

To configure a port set:

  1. Select Configure > NAT Policy > Port Sets.
  2. Click the plus sign (+) to create a new port set.
  3. Complete the configuration according to the guidelines provided in Table 227.
  4. Click OK.

A new port set with your configurations is created. You can also assign the profile to a domain; see Assigning Policies and Profiles to Domains.

Table 227: Port Set Settings

Setting

Description

Name

Enter a unique string of alphanumeric characters, colons, periods, slashes, dashes, and underscores; no spaces allowed; 63-character maximum.

Description

Enter a description for the new port set; maximum length is 1024 characters.

Ports or Port-Ranges

Enter comma-separated ports, port ranges, or both; maximum number of ports and port ranges for a single port is 8.

Related Documentation

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit