About the Monitor Settings Page
To access this page, click Administration > Monitor Settings.
You can use the Monitor Settings page to enable and disable polling of data from devices. Polling allows Security Director to pull data specific to traffic, resource usage, and sessions across user-specified time intervals.
Tasks You Can Perform
You can perform the following task from this page:
Configure monitor settings. To change the status of a device, select a device, click Enable or Disable and follow the guidelines in Table 1.
Table 1 provides guidelines on using the fields on the Monitor Settings page.
Table 1: Fields on the Monitor Settings Page
Enable or disable device monitoring. By default, device monitoring is enabled.
Enable or disable traffic polling. The allowed range is 1 to 60 minutes. By default, traffic polling is enabled every 15 minutes.
Resource Usage Polling
Enable or disable resource usage polling. The allowed range is 1 to 60 minutes. By default, resource usage polling is enabled every 10 minutes.
Enable or disable session polling. The allowed range is 1 to 60 minutes. By default, session polling is disabled. Session polling can be enabled every 30 minutes, by default.
Name of a device. Example, device1.
IP address of a device. Example, 10.0.0.0.
The SRX series device platform. Example, SRX1500.
The status of a device. The options are: