Registering JSA and IBM QRadar with Security Director
Administrator must register JSA or IBM QRadar with Security Director. After registration, administrator can block an offense.
You can refer the same procedure for IBM QRadar.
- Log in to the JSA application.
- Select Admin.
- Select Apps > Security Director Extension in the left hand navigation.
The Apps page is displayed as shown in Figure 1.
- Click SD Registration.
The JSA REGISTRATION page is displayed as shown in Figure 2.
- Enter the JSA console and Security Director login credentials
and click Register.
The IP address must be in ipv4 format.
If the JSA and Security Director credentials are valid, then a success message is displayed.
If the registration is successful, then administrators can block offense using the Security Director Extension wizard in the offense summary page.