Help Center User GuideGetting StartedFAQRelease Notes
 
X
User Guide
Getting Started
FAQ
Release Notes
Contents  

About the Unified Policies Page

To access this page, click Configure>Firewall Policy>Unified Policies.

Unified policies are security policies that enable you to use dynamic applications as match conditions along with the existing 5-tuple or 6-tuple (with user firewall) match conditions to detect application changes over time. If the traffic matches the security policy rule, one or more actions defined in the policy are applied to the traffic.

Tasks You Can Perform

You can perform the following tasks from this page:

Field Descriptions

Table 146 provides guidelines on using the fields on the Unified Policies page.

Table 146: Fields on the Unified Policies Page

Field

Description

Seq

Order number for the policy.

Name

Name of the firewall policy; maximum length is 63 characters.

Rules

Rules associated with the policy.

Devices

Devices associated with the policy.

Publish State

Displays the publish state of the Unified policy configuration.

  • Not Published—Firewall policy is created but not published.

  • Published—Configuration is published to all devices associated with the policy.

  • Partially Published—Configuration is published to a few devices associated with the firewall policy.

  • Re-publish Required—Modifications are made to the firewall policy configuration after it is published.

Last Modified

The date and time when the policy was modified.

Created By

The user who created the policy.

Modified By

The user who modified the policy.

Domain

The user domain.

Related Documentation

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit