Help Center User GuideGetting StartedFAQRelease Notes
User Guide
Getting Started
Release Notes

About the Monitor Settings Page

To access this page, click Administration > Monitor Settings.

You can use the Monitor Settings page to enable and disable polling of data from devices. Polling allows Security Director to pull data specific to traffic, resource usage, and sessions across user-specified time intervals.

Tasks You Can Perform

You can perform the following task from this page:

Field Descriptions

Table 338 provides guidelines on using the fields on the Monitor Settings page.

Table 338: Fields on the Monitor Settings Page



Device Monitoring

Enable or disable device monitoring. By default, device monitoring is enabled.

Traffic Polling

Enable or disable traffic polling. The allowed range is 1 to 60 minutes. By default, traffic polling is enabled every 15 minutes.

Resource Usage Polling

Enable or disable resource usage polling. The allowed range is 1 to 60 minutes. By default, resource usage polling is enabled every 10 minutes.

Session Polling

Enable or disable session polling. The allowed range is 1 to 60 minutes. By default, session polling is disabled. Session polling can be enabled every 30 minutes, by default.

Device Name

Name of a device. Example, device1.

IP Address

IP address of a device. Example,


The SRX series device platform. Example, SRX1500.


The status of a device. The options are:

  • Enable – Enables device polling.

  • Disable – Disables device polling.

Related Documentation

Help us to improve. Rate this article.
Feedback Received. Thank You!

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      

Additional Comments

800 characters remaining

May we contact you if necessary?


Need product assistance? Contact Juniper Support