Registering Security Services
Use the Register Security Service page in Security Director to register a Juniper security service on a specific NSX Manager. After registering the security service from Security Director, log in to the vCenter server and deploy the service from NSX.
To register the Juniper security service:
- Select Devices > NSX Managers.
The NSX Managers page appears.
- Select the NSX Manager for which service needs to be registered.
- From the More list or right-click menu, select Register
Security Service.
The Register Security Service page appears.
- Complete the configuration by using the guidelines in Table 1.
- Click Register to complete the registration.
A confirmation message appears if the registration is successful or not.
To verify if the security service registration is successful, from the vSphere Web Client, click Networking & Security and then click Service Definitions. In the Service Managers tab, verify that Security Director is listed with the status as In Service.
Table 1: Fields on the Register Security Service Page
Field | Description |
|---|---|
Service Name | Enter the name for the Juniper Security Service. |
vSRX OVF URL | The vSRX OVF image that you have copied to the Policy Enforcer VM is listed here. Select the vSRX OVF image from the list. |
vSRX Root Password | Enter the root password of the vSRX instance. The same root password is set for all the vSRX VMs deployed in NSX. |
Description | Enter the description of the Juniper security service registration; you can use a maximum of 255 characters. |