Help Center User GuideGetting StartedFAQRelease Notes
 
X
User Guide
Getting Started
FAQ
Release Notes
Contents  

Creating an End User Profile

Procedure

Use the Create End User Profile page to create an end user profile. You can apply the end user profile to the firewall policy rules.

To create an end user profile:

  1. Select Configure > User Firewall Management > End User Profile.

    The End User Profile page is displayed.

  2. Click the + icon.

    The Create End User Profile page is displayed.

  3. Complete the configuration according to the guidelines provided in Table 190.
  4. Click OK to create an end user profile or Cancel to discard the profile.

    An end user profile is created in the End User Profile page. While creating firewall policy rules, you can select an end user profile. When traffic arrives from a device, it matches that device identity profile with a security policy whose End User Profile field specifies the device identity profile name. If a match is found, the security policy is applied to traffic issuing from the device.

Table 190: Fields on the Create End User Profile Page

Field

Description

Name

Enter a unique string of alphanumeric characters, dashes, and underscores. No spaces are allowed. Maximum length is 64 characters.

Description

Enter a description of the end user profile; maximum length is 1024 characters.

Device Domain

Enter a device domain name to which the SRX Series device belongs, using a string of alphanumeric characters, dashes, and underscores.

Add Attributes

 

Click the + icon.

The Add Attributes page is displayed. Use this page to add a predefined attribute or create a custom attribute. You can specify one or more values to an attribute and click OK.

To edit the attributes, click the pencil icon and edit the details.

Attribute Type

Select an attribute, either predefined or custom.

Click Create to create a custom attribute.

Attribute Value

Enter one or more values to the attribute, separated by commas. Attribute value must be a string consisting of letters, numbers, dashes, underscores, and dots. Maximum length is 64 characters.

Maximum attribute values allowed for an attribute-type are 20. Each value should be less than 64 characters.

The maximum attribute values per profile are 100.

Create New Attribute Type

 

In the Add Attribute page, click Create to create unique custom attribute types.

The Create New Attribute Type page is displayed.

Attribute Type

Enter a unique attribute type name. It can be a string of alphanumeric characters, dashes, and underscores. No spaces are allowed. Maximum length is 64 characters.

Related Documentation

Ask questions in TechWiki

Check documentation in TechLibrary

Rating by you:      
X

Additional Comments

800 characters remaining

May we contact you if necessary?

Name:
Email:

Need product assistance? Contact Juniper Support

Submit